0 μέλη και 1 επισκέπτης διαβάζουν αυτό το θέμα.
πρώτη θεραπεία έλαβε τέλος! Αμην! χθες κοιμήθηκα 3 σήμερα ξυπνησα 7 θα εφαγες βαρια μου φαινεται για την αλλαγή νερού…. τελικά άφησα το φάρμακο 12 ώρες και ένα τέταρτο ουτε ρολοι να εισουν . Ξανά έβαλα το σκίμμερ σε λειτουργία δεν το πεταξες αυτο ακομα; και στο ριάκτορα έβαλα 2 μεζούρες(απορυπαντικού πλυντηρίου) άνθρακα. παλι καλα που δεν εβαλες και απορυπαντικο! Οι ερημίτες ψόφησαν ελα! , τουλάχιστον τον ένα τον βρήκα) τους αλλους αν δεν τους βρεις ξερεις... , η γαρίδα ζεί όπως και κάποια κοπίποδα που περπατάνε στα τζάμια. Τα σκουλίκια κάποια την ακούσανε τα αλλα θα ηταν κουφα μαλλον , κάποια όχι, αλλά ίσως φύγουν και αυτά(θα δείξει). Για ένα περίεργο λόγο, μόλις έριξα το φάρμακο παρατήρησα ότι κάποιες ακρόπορες που δεν άνοιγαν τους πολύποδές τους, τους είχαν ανοίξει μα ελα τωρα!!! . Να είναι η ιδέα μου; μαγος εισαι; δεν ξέρω παρατηρώ τα κοράλλια μου εδώ και καιρό και τα συγκεκριμμένα δεν είχαν ανοιχτούς πολύποδες! ..... τό μόνο που με ανυσηχεί είναι πως το νερό που μάζεψα από τη θάλασσα είχε πολύ χαμηλό μαγνήσιο(990), πράγμα πολύ περίεργο εφόσον έχω πάρει αρκετές φορές και τόσο χαμηλά δεν ήταν ποτέ .... η πετρα του σκανταλου;... (ελπίζω να ήταν θεμα του τέστ, να χάλασε). Εριξα 110ml στο νερό της αλλαγής(125λίτρα)…….
Milbemax tablets for dogs (5-25kg):12.5mg milbemycin oxime (dose range 0.5-2.5mg/kg)125mg praziquantel (dose range 5-25mg/kg)
Interceptor Spectrum Tasty Chews containing 23mg milbemycin oxime and 228mg praziquantel in blue pack.
Treating your whole aquarium:This will take at least 6 hours. It is recommended to use a minimum of 3 treatments, 1 week apart. Use 25mg per 10 gallons of aquarium water. Make sure to account for water displacement from your rocks and substrate. Include the water in your sump and plumbing. Each tablet, when ground, treats 380 gallons. Grind the tablets to a fine power, preferably using a mortar and pestle. When possible, use a scale that measures to 0.001 grams to ensure accuracy. Measure out the powder onto the scale, and be as accurate as possible. Remember, it is just 25mg per 10 gallons of water. Turn off your skimmer, ozone generators, UV sterilzers, and any mechanical filtration. Remove any carbon. Your pump stays on, as you still want water to circulate into your sump/refugium to treat any red bugs there. You also want to treat the water inside your calcium reactor and skimmer (while the skimmer is off). Remove any invertebrates you want to save, like shrimp and crabs. It is slightly possible they will be infested as well, so red bugs may be reintroduced after the treatment. Dissolve the premeasured powder into some aquarium water, stirring frequently. Once it is dissolved, spread the mixture on top of the water. Wait 6 hours! You aquarium water should look normal during the whole treatment. If anything looks like it is going wrong during the treatment, immediately do a water change and add activated carbon. After the 6 hours is up, do at least a 25% water change and add activated carbon. It should be safe to reintroduce your invertebrates after the water change. The red bugs have died, but you may still see them on your corals. You can blow their little bodies off of your Acropora sp. with a pipette or turkey baster. Do another 25% water change 24 hours later and replace the activated carbon. Repeat the above process 7 days later, and a last treatment another 7 days after that. The subsequent treatments are to eliminate the copepods that were in their egg and larval (naupilus) stages at the time of the first treatment.